PP needle punched felt
Polypropylene is a relatively low temperature fiber with quite excellent chemical resistance which finds use in specialist applications such as the chemical industry.
The fibers cannot hydrolyse, the only chemical weakness being a susceptibility to oxidising agents. Other than that they can be used almost universally provided the temperature is below 90°C.The fiber is of a low density (it floats in water) and so a given denier of fiber is much larger in diameter than the polyester equivalent. This leads to felts being quite thick, almost 50% thicker than for the same polyester weight.The fiber is very prone to static build up so the felts are often augmented by the incorporation of either conductive fibers or a conductive scrim or a combination of the two. This then helps to dissipate potential static electric discharges.
Features:
Smooth surface, more defined pore size and good air permeability
Low temperature resistance ( 88-110 ℃)
Excellent resistant to hydrolysis, acids and alkalies.
Lower fiber release, Lower density,High mechanical characteristics
Applications:
Galvanic industry and Chemical industry
Prefiltering solvents and acids
Prefilter to extend final filter life
Final filter for noncritical filtrations
Liquid-solid seperation with strong acid and alkaline conditions filter press
Air filtration under 100℃
Specification
Compositions | PP/PP ordinary scrim |
Weight (g/ m2) | 500 | 550 |
Thickness (mm) | 2.1 | 2.3 |
Air permeability (L/m2/s) | 12.6 | 10.8 |
Tensile strength (N/5 × 20cm) | wrap | >960 | >1200 |
weft | >1060 | >1500 |
Tensile Elongation(%) | wrap | <35 | <35 |
weft | <55 | <55 |
Broken strength (Mpa/min) | 2.15 | 2.10 |
Continuous working temperature(℃) | 88 | 88 |
Short time Working temperature(℃) | 110 | 110 |
Anti-acid | Excellent | Excellent |
Anti-alkali | Excellent |
Anti-abrasion | Excellent |
The stability of water solution | Excellent |
Finishing treatment | High temperature hot pressing,Singeing |